Campbell Hausfeld PT2830, Operating Instructions And Parts Manual

Page: 7 / 24

1 Tank lid handle PT001200AV 1
2 1/4 inch NPT Safety valve V-215101AV 1
3 3/8 inch NPS Hose connector HF180200AV 1
4 Paint tank lid PT282100AV 1
5 Lid seal PT282200AV 1
6 3/8 inch NPS Material tube PT006700AV 1
7 Galvanized tank with decals PT282300AV 1
8 1/8 inch NPT Pressure gauge GA231300AV 1
9 0-50 psi Pressure regulator RE011300AV 1
10 1/4 inch NPT Pipe nipple ST016800AV 1
11 1/4 inch NPT T Fitting ST160100AV 1
12 1/8 inch NPT Plug with 3/16 inch Hex socket * 1
13 3/8 inch NPS SBR-NR 15’ Material hose HA633000AV 1
14 1/4 inch NPS PVC 15’ Air hose HA632900AV 1
15 Wing bolt 1
16 Latch 1
17 Pin 1
18 E-ring 1
REPLACEMENT PARTS KITS
Latch kit PT282900AV
* Standard hardware item - available at your local hardware store
Replacement Parts List
Reference
Number
Description Part Number Quantity
This unit must be
assembled as indicated
in these instructions. Only those parts supplied with
this unit should be used. These parts are safety and
performance engineered for this paint tank. Use only
OEM replacement components.
Make sure fittings are
properly tightened
before pressurizing the tank.
PT2830
Please provide following information:
- Model number
- Serial number (if any)
- Part description and number as shown in parts list
Address any correspondence to:
Campbell Hausfeld
Attn: Customer Service
100 Production Drive
Harrison, Ohio 45030
7
www.chpower.com