CAMPARK T45A, Instruction Manual

Page: 20 / 36

The red LED will flash and counts down for 5 seconds when you just
switch to Live Mode(ON), and then the camera works automatically
and enters the Standby Mode.
Also check that the camera is set to the correct height in line with the
point to be observed. Where necessary, point the camera down for
optimum alignment
Note
：
Please do the horizontal
movement before the PIR.
vertical movement could not
detect correctly.
Please quicken your steps when
you do the test in a long distance
before PIR detection area.
The PIR detection distance would be shorter if the environment
temperature reaches or above 30 °
The screen would automatically turn off without any operation within
3 minutes in SETUP mode, press any button will make turn it on again.
E N
14