Campania International Longvue FT-225 Assembly Instructions Download Page 3

Page: 3 / 4

FT-225 Longvue Fountain

Assembly Instructions

Step 8 -

Center the small bowl (FT-225B) over the pump house (FT-225C).

Step 9 -

Use a hose clamp to secure the loose end of the non-kink tubing to the pipe protruding

from the bottom of the small bowl (FT-225B).

Step 10 -

Center the finial (FT-225A) over the small bowl (FT-225B).

Step 11 -

Fit the pipe protruding from the top of the small bowl (FT-225B) into the hole in the

bottom of the finial (FT-225A).

Step 12 -

Fit the pump house door (FT-225D) into the pump house (FT-225C).

Step 13 -

Fill the fountain with water.

FT-225C (39 lbs)

21.5"W x 6.75"H

FT-225C (39 lbs)

5.5"W x 11"H

FT-225D (2 lbs)

5.5"L x 1.5"W x 3.5"H

Summary of Contents for Longvue FT-225

Page 1: ...MPF320 320 GPH Pump 16 ft cord length Tools Required Bubble Level Screwdriver Pump Kit Parts List Image Component Quantity PK300 Pump use adapter indicated 1 10 Stopper 1 Approx 24 length of 1 2 black...

Page 2: ...crete or a hard packed gravel pad If the base is level but some components seem off rotate components or use wedges to level them Step 3 Create a Drip Loop To prevent water from dripping down the cord...

Page 3: ...ottom of the small bowl FT 225B Step 10 Center the finial FT 225A over the small bowl FT 225B Step 11 Fit the pipe protruding from the top of the small bowl FT 225B into the hole in the bottom of the...

Page 4: ...ompletely seated in the fountain You can also use 100 pure clear silicone to ensure a proper seal is achieved Step 4 Cracking Your fountain may be cracked from improper winter care see Winter Care in...