FT-193 Caterina Fountain in Basin
Assembly Instructions
rev 6/12/2020
Fountain Information:
• Professional installation is recommended for this fountain!
• This fountain holds approximately 130 gallons of water.
• This fountain uses a large fountain cover, but does not cover the basin:
FTNCOV-LG
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPP800 - 800 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Tape Measure
Pump Kit Parts List
Image
Component
Quantity
PK800 Pump
1
#10 Stopper
1
n/a
Metal plug for hole in side of basin
(pre-installed in basin)
1
2" length of 3/4" clear vinyl tubing
1
2" length of 5/8" clear vinyl tubing
1
Approx. 50" length of 1/2" black
non-kink tubing
1
7.5" length of 1.5" PVC pipe - standpipe
1
Wedges
6
Hose Clamp
1
Fountain Components
Image
Item Description
Component
Item #
Quantity
Round 6 ft.
Fiberglass
Fountain Basin
FGB-2030
1
Caterina
Fountain Small
Bowl
FT-192B
1
Caterina
Fountain Large
Bowl
FT-192E
1
Caterina
Fountain in
Basin Finial
FT-193A
1
Caterina
Fountain in
Basin Small
Pedestal
FT-193C
1
Caterina
Fountain in
Basin Large
Pedestal
FT-193E
1
Caterina
Fountain in
Basin Pump
House
FT-193F
1
Caterina
Fountain in
Basin Pump
Door
FT-193G
1
Caterina
Fountain in
Basin Coping
FT-193H
6
Proudly
MADE IN USA
