FT-193 Caterina Fountain in Basin
Assembly Instructions
Step 9 - Position the large bowl (FT-192E) on top of the large pedestal (FT-193E).
Step 10 - Fit the standpipe into the large bowl (FT-192E).
Step 11 - Center the small pedestal (FT-193C) inside the large bowl (FT-192E).
Step 12 - Using a hose clamp, connect the 1/2" non-kink tubing end of the assembled tubing to
the pipe protruding from the bottom of the small bowl (FT-192B).
Step 13 - Feed the tubing down through the small pedestal, large bowl, and large pedestal to the
pump.
Step 14 - Fit the 3/4" clear tubing over the pump outlet.
Step 15 - Center the small bowl (FT-192B) on the small pedestal (FT-193C).
Step 16 - Place the finial (FT-193A) into the small bowl (FT-192B) by fitting the copper in the finial
over the copper in the bowl.
Step 17 - Fit the pump cover door (FT-193G) into the pump cover (FT-193F).
FT-192E (162 lbs)
35.25"W x 8"H
FT-193C (35 lbs)
10"W x 16"H
FT-192B (34 lbs)
18.25"W x 5"H
FT-193A (13 lbs)
5.5"W x 13"H
FT-193G (6 lbs)
7.5"L x 2.75"W x 5.5"H
