Die Blei-Batterie ist mit einem 10 m-Kabel und Verbindungsklammern, die Lithium-Batterie mit einem 1,5 m Kabel
ausgestattet.
3.2.1 Kettenschneider mit Verlängerung
Der Kettenschneider kann mit einer festen (25) oder einer mittleren oder langen teleskopischen (26) Verlängerung
ausgestattet werden.
Er besteht aus einem ergonomischen Handgriff (1), einer Verlängerung, einem Motorgehäuse (17) aus leichter Legierung und
einem 8“-Schwert (14) mit ¼“-Kette (15).
3.3 Zubehörteile
• Bedienungs- und Wartungsanleitungen
3.4 Empfohlener Gebrauch
Der Kettenschneider wurde zum Schneiden nach den oben genannten Weisen und Beschränkungen hergestellt.
ACHTUNG!
• Jeder andere Gebrauch ist als ungeeignet und potentiell gefährlich zu betrachten und lässt die Garantie verwirken.
• Wenn das Gerät zu Zwecken verwendet wird, die anders sind als die hingewiesenen, kann es sich schwer beschädigen
oder Schäden an Leuten oder Dingen verursachen.
3.5 Bestandteile des Gerätes
POS.
BEZEICHNUNG
FUNKTION
PHOTO-
BEZIEHUNG
1
Handgriff
Wird in der Hand gehalten, um das Gerät zu steuern
A
2
Vorderschutz
Schützt das Ritzel und das Kettenschwert
A
3
Kettenschutz
Schützt die Kette, wenn das Gerät nicht arbeitet
A
4
ON/OFF-Schalter
Schaltet das Gerät ein und aus
B
5
Betätigungshebel
Betätigt das Gerät, wenn er gedrückt wird
B
6
Sicherheitsvorrichtung
Kontrolliert den Betätigungshebel
B
7
Handgriff-Verbinder
Verbindet das Gerät mit dem Speisungskabel
B
8
Handgriff
Erlaubt dem Bediener zu arbeiten, indem er das Gerät in der
Hand hält
C
9
Stopfen
Erlaubt, Öl in den Behälter hinzuzufügen
C
10
Zündung-Led-Licht
Zeigt, ob das Gerät ein- oder ausgeschaltet ist
C
11
Speisungskabel
Verbindet das Gerät mit der Batterie
D
12
Kettenbremse (nur für die
Ausführung ohne Verbindung
mit einer Verlängerung)
Schützt die Hand und setzt die Notbremse in Betrieb
E
13
Befestigungsmutter
Befestigt das Schwert
E
14
Schwert
Steuert die Schnittkette
F
15
Kette
Schneidet Äste, Stämme, usw.
F
16
Einstellungsschraube
Stellt die Kettenspannung ein
F
17
Motorgehäuse
Enthält den Motor und die elektronischen Karten
F
18
Kettenbefestigungsbolzen
Hält die Kette im Fall von Bruch an
F
19
Verzeichnisaufkleber
Zeigt die kennzeichnenden Daten des Gerätes
N
20
Elektronische Karte für die
Schmierungspumpe
Kontrolliert die Schmierungspumpe
O
21
Schmierungspumpe
Erlaubt die Schmierung der Kette und des Schwertes
O
22
Schmierungsöl-Behälter
Enthält das Öl für die Schmierung der Kette und des Schwertes
O
23
Elektronische Karte
Steuert das Gerät
O
24
Brushless-Motor
Motorisiert die Kette
O