CAMPAGNOLA Line 58, Use And Maintenance Manual

Page: 19 / 104

Pag. 18 Use and maintenance manual – Translation of
original Instruction Rev.: 00, Data 26/11/2018
3.5 Composition of the unit
Pos. Description Function Pict.
1 Power supply cable Connects the power unit with the battery B
2 Battery Power supply the tool A
3 Backpack Allows to carry the battery B
4 ON/OFF button Turns the battery on and off A
5 Charge connector Allows to charge the battery B
6 Cable connector Connects the cable to the battery A
7 Battery display Allows to check the charge level A
8 ON/OFF Led light Shows if the battery is on or off A
9 Fixing slots Allow to fix the battery to the backpack C
10 Fixing supports Allow to fix the battery to the backpack A
3.6 Technical details
Technical details Li-Ion 700
Battery weight 3.7 Kg
Battery voltage 50.4 V
Battery Lithium ion
Average battery charge time 8-9 hours
Battery endurance 8 hours (*)
Automatic electronic battery charger model SBC1402A (14S)
(*) This detail depends on the kind of use, of tree and of connected tool.
3.7 Safety devices
•
Built-in safety device
–
Automatic switch-OFF : if not used for over 20 minutes and with the charge level over 20%,
the power supply is switched off.
•
With the charge level of the battery below 20%, the automatic switch-off occurs in 5 minutes.
•
Use the ON/OFF button (4) to restart the battery.
•
Built-in protection device: Protects the battery set avoiding that the voltage increases or decreases too much, consid-
ering the indicated thresholds.
4.1 Starting
•
Remove the components from the packaging.
•
Recharge the batteries (2) (see par. 5.3).
•
Fit the battery set (2) onto the backpack (3) by following the instructions in par. 4.2.
•
Plug the cable (1) taking care of the male/female connections.
4.2 Fitting the battery set onto the backpack
•
Remove the backpack (3) and the battery (2) from the packaging.
•
Insert the fixing supports (10) into the lower pocket of the backpack.
•
Insert the fixing belts of the backpack into the corresponding fixing slots on the top of the battery (9)
•
Fasten the fixing belts inside the backpack (3).
5.1 Starting the unit
•
Wear the backpack (3) and adjust the belt length by means of the buckle.
•
Adjust the braces buckle so that they cannot slip from the shoulders.
•
Turn the button ON (4).