Pag. 10
Manuale Uso e Manutenzione – Istruzioni
Originali Rev.: 01, Data 01/02/2022
3.7 Dispositivi di sicurezza
•
Dispositivo di sicurezza integrato –
Autospegnimento
: dopo 20 minuti di inutilizzo dell’attrezzo e con la batteria oltre il
20% di carica, l’alimentazione viene interrotta.
•
Con la batteria inferiore al 20% di carica, l’autospegnimento avverrà dopo 5 minuti.
•
Per riavviare la batteria utilizzare il pulsante
On/Off (4).
•
Dispositivo di protezione integrato: protegge la batteria evitando che la tensione scenda sotto un valore minimo e/o che
la corrente superi un valore massimo di soglia.
4.1 Avviamento
•
Estrarre i componenti dall’imballo.
•
Ricaricare la batteria (2) (vedi par. 5.3).
•
Applicare lo zaino (3) alla batteria (2) seguendo le istruzioni indicate nel par. 4.2
•
Collegare il cavo (1) rispettando gli accoppiamenti maschio / femmina.
4.2 Installazione della batteria sullo zaino
•
Estrarre lo zaino (3) e la batteria (2) dall’imballo.
•
Inserire nella tasca inferiore dello zaino le staffe (10).
•
Inserire le cinghie di fissaggio dello zaino nelle apposite asole sulla parte superiore della batteria (9)
•
Fissare le cinghie all’interno dello zaino (3).
5.1 Avvio dell’unità
•
Indossare lo zainetto (3) regolando la lunghezza della cintura mediante l’apposita fibbia.
•
Regolare la fibbia sulle bretelle in modo che non possano scivolare dalle spalle.
•
Accendere il pulsante
On/Off (4).
ATTENZIONE!
•
Utilizzare l’unità solo per gli scopi descritti nel par. “Descrizione del prodotto”. Ogni altro utilizzo può essere
causa di infortuni.
•
Lo zainetto (3) deve essere posizionato in modo tale che il peso sia sostenuto al 90% all’altezza della vita
dell’operatore e non dalla schiena.
•
Le bretelle devono essere utilizzate per migliorare il bilanciamento del peso (10%).
5.2 Visualizzazione display
Premendo brevemente il pulsante (11) sul display (9), al rilascio dello stesso verrà visualizzato lo stato di carica per 5
secondi con la seguente modalità:
•
4 barre led – Stato di carica tra 80/100%
•
3 barre led – Stato di carica tra 60/80%
•
2 barre led – Stato di carica tra 40/60%
•
1 barre led – Stato di carica tra 20/40%
•
1 led lampeggiante – Stato di carica inferiore 20%
•
Tutti i led lampeggianti con ripetizione 1s, = Errore.
Se viene rilevato uno stato di sotto tensione, la condizione permane, anche in caso di spegnimento e riaccensione, finché
la batteria non raggiunge almeno il 20% dello Stato di carica (SoC).
ATTENZIONE!
In caso di mancato ripristino errore, portare la batteria in un centro assistenza autorizzato.
5.2.1 Led dedicato per l’ON/OFF della batteria
Alla pressione del pulsante durante la fase di spegnimento inoltre andranno a decrescere in modo temporizzato le barre
led accese fino a portarsi a zero. Quando l’ultima barra LED sarà spenta la batteria si spegne al rilascio del pulsante.
Summary of Contents for Li-Ion 700
Page 3: ...Manuale Uso e Manutenzione Istruzioni Originali Rev 01 Data 01 02 2022 Pag 3 ...
Page 50: ......
Page 51: ......