14
Water Tank Meter
–
If your trailer has a water tank meter,
you can easily monitor the level of the
fresh water and gray water tank.
Pushing the ―
FRESH
‖ button will
display the current level of the fresh
water tank.
F (full), 2/3, 1/3, or E (empty)
These levels are only approximate.
Pushing the ―
WASTE
‖ button will
display the current level of the gray water tank.
Pushing the ―
BATTERY
‖ button will display the approximate charge
condition of the battery. Use the
Battery Scale
:
C, G, F, L
.
C (charging), G (good), F (fair), or L (low
).
NOTE: The F, 2/3, 1/3, E scale is the WATER scale ONLY.
Switching ON the Water System
-
The pump on the freshwater
system is activated by a switch
.. The switch is located in the kitchen
on the right side, near the AC and DC outlets. The switch is lighted in the
ON position.
If you will not be using the water for a while, turn the pump switch OFF.
A slightly dripping faucet may drain the freshwater tank in only a couple
hours. Turning OFF the switch will prevent any dripping as well as
prevent unnecessary pump cycling.
When the fresh water tank is empty, the pump will continue to run, even
if the faucet is turned OFF. Turn OFF the
pump switch
when the tank is
empty. Running the pump for a few minutes without water will not hurt
the pump. Extended running without water may overheat pump motor.
Do not store items in front of the switch during travel. Items may
accidentally activate the switch if items shift or bounce.
