9
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communica-
tions.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
_Reorient or relocate the receiving antenna.
_Increase the separation between the equipment and receiver.
_ Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is
connected.
_Consult the dealer or an experienced radio/TV technician for help.
Caution : Changes or modifi cations not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
IMPORTANT NOTE : To comply with FCC RF exposure compliance requirements, the antenna used
for this transmitter must be installed to provide a separation distance of at least 20 cm from
all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.
Summary of Contents for DVWS-100
Page 11: ...11 MEMO ...
Page 12: ...INSTRUCTION MANUAL ...
