Copyright Homecast Europe GmbH V1.6
19
Technische Änderungen und Irrtümer vorbehalten
a) Select Switch Type.
b) If you use an USALS motor, select from the Switch
Type using the
/
button.
c) Change position on your USALS motor through the
Option.
„Go to Position“: Press the
(OK) button to move the motor tot he position calculated by the
longitude and latitude.
a) „Go to“ allows you to go tot he Auto Scan or Manual
Scand Mode directly.
b) Select „Auto Scan“ or „Manual Scan“ and press the
“OK”
button.
5.2.2 Auto Scan
You can search the channels offered by the satellite for which your antenna has been configured.
a) Select the satellite for scanning using
/
button and
press the
“OK”
button.
b) The check mark indicates which satellite has been
marked for scanning.
c) Press the
/
button, select scan potion using
/
button and press the
“OK”
button.
d) If you want to scan the satellite move to „Start
Scan“ and press
“OK”
button.
5. Manu Operation
