FLASHLIGHT
- The flashlight is operated by depressing the bottom large button on the face of the CamLite with the flashlight symbol. It continues to operate until the button is
depressed again.
LASER POINTER
- The laser pointer is operated by pressing the top left button with the laser symbol. It only works if the switch is held down and ceases operating when the button
is released.
CAMERA
- The camera is operated by pressing the middle button with the camera symbol. The LED to the right and slightly above the camera button will glow red when the camera
is on.
AUDIO - The audio can be turned off by pressing the top right button. The LED will go off once the button is pressed. Audio is only transmitted when LED is on. The audio will
come on every time the transmitter is turned on.
RECEIVER
- Follow instructions with the receiver for operation. Although the CamLite transmits on two channels, most are set on channel one, the up position on the receiver.
Replacing the Bulb
1.
Use only the CamLite replacement bulb #70284. A spare bulb is included with your CamLite.
2.
Allow the bulb to cool before replacing.
3.
Remove the tail cap and battery before replacing the bulb.
4.
Unscrew and remove the face cap and lens, and the specially designed spring mounted bulb that will simply pop out. Insert the replacement,
push the lens over the faceplate, and screw the face cap back on the CamLite.
Care and Use of Nickel Metal Hydride Batteries
4
