background image

16

Brine Master

®

English

LIMITED WARRANTY

1. Poly Tank Limited Warranty - Subject to other terms in this Limited 

Warranty, Manufacturer warrants to the original end user that this 

Tank will be free from material defects caused during the 

manufacturing process for a period of 5 years from the Purchase

Date provided such warranty to the original end user shall be 

extended to 10 years from the Purchase Date if the original end 

user registers the Tank with Manufacturer within 30 days of the 

Purchase Date. To register the Limited Warranty, registration must

be completed in accordance with the requirements set forth at 

enduraplaswarranty.com

Other Products and Parts Limited Warranty - Subject to other 

terms in this Limited Warranty, Manufacturer  warrants  to  the 

original  end  user  that  products  and  parts  manufactured  by 

Manufacturer (other than tanks) will be free from material defects 

caused during the manufacturing process for a period of 1 year 

from the Purchase Date unless otherwise expressly stated in 

writing by Manufacturer that an extended warranty applies.

2. Other Warranties Disclaimed and Excluded

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, 

WHICH EXTEND BEYOND THE LIMITED WARRANTY HEREIN 

STATED, AND MANUFACTURER EXPLICITLY DISCLAIMS AND 

EXCLUDES ANY AND ALL OTHER WARRANTIES INCLUDING 

BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, 

FITNESS FOR PARTICULAR PURPOSE, CUSTOM OR USAGE 

OF TRADE, AND COURSE OF DEALING. NO AGENT, 

EMPLOYEE OR REPRESENTATIVE OF MANUFACTURER HAS 

AUTHORITY TO BIND MANUFACTURER TO ANY 

REPRESENTATION OR WARRANTY EXCEPT AS STATED IN 

THIS LIMITED WARRANTY.

WARRANTY

Summary of Contents for BRINE MASTER 3000





























Reviews: