12
Brine Master
®
English
MAINTAINING
The unit requires proper care for longevity and proper
operation. Follow all requirements for pump and motor by
reviewing their manuals that are included.
At the beginning of each brining session ensure there are no
hose or fitting leaks.
There is a 3” bottom cleanout on the bottom of hopper that
can be connected to a hose or can be opened and drained
into skid steer bucket. Also to drain hopper you can put a
suction hose onto the additive port and insert the suction
end with a screen attached into hopper. You will need to
have valves set to the down position. Your discharge hose
needs to be connected so hopper can discharge into your
applicable tank.
The filter screen should be cleaned of any debris that would
cause a flow issue. Simply wipe off screen and disposing of
debris in a trash can.
The lower filter has a drain which while running can be
opened SLOWLY to release any debris from filter into a
bucket.
DO NOT leave salt brine in pump unit over long periods of
time of non use. This can cause salt creep and can move
into motor and seize up. Best practice is to clean the hopper
after use to prevent salt from hardening in the bottom of the
hopper. This can take a very long time to dissolve on the...
next use. Run clean water through unit and then drain pump
using drain plug located at bottom.
