Camille Bauer SINEAX DME 406, Operating Instructions Manual

Page: 34 / 42

34
5.2 Resetting
– Energy meter reset
– Maximum value pointer reset
5.3 Programming the SINEAX DME 406
There are two ways to confi gure the SINEAX DME 406:
1) via RS 232, with PC software DME 4
2) via PROFIBUS-DP Interface with DBF fi le
Table 2: Programming
DESCRIPTION
Application
A11 … A16 A34 A24 / A44
1. Application (system)
Single-phase AC A11 ––– –––
3-wire, 3-phase symmetric load, phase-shift U: L1-L2, I: L1 A12 ––– –––
3-wire, 3-phase symmetric load A13 ––– –––
4-wire, 3-phase symmetric load A14 ––– –––
3-wire, 3-phase symmetric load, phase-shift U: L3-L1, I: L1 A15 ––– –––
3-wire, 3-phase symmetric load, phase-shift U: L2-L3, I: L1 A16 ––– –––
3-wire, 3-phase asymmetric load ––– A34 –––
4-wire, 3-phase asymmetric load ––– ––– A44
4-wire, 3-phase asymmetric load, open Y ––– ––– A24
2. Input voltage
Rated value Ur = 57.7 V U01 ––– –––
Rated value Ur = 63.5 V U02 ––– –––
Rated value Ur = 100 V U03 ––– –––
Rated value Ur = 110 V U04 ––– –––
Rated value Ur = 120 V U05 ––– –––
Rated value Ur = 230 V U06 ––– –––
Rated value Ur [V] U91 ––– –––
Rated value Ur = 100 V U21 U21 U21
Rated value Ur = 110 V U22 U22 U22
Rated value Ur = 115 V U23 U23 U23
Rated value Ur = 120 V U24 U24 U24
Rated value Ur = 400 V U25 U25 U25
Rated value Ur = 500 V U26 U26 U26
Rated value Ur [V] U93 U93 U93
Lines U01 to U06:
Only for single-phase AC current or 4-wire, 3-phase symmetric load
Line U91: Ur [V] 57 to 400
Line U93: Ur [V] > 100 to 693
3. Input current
Rated value Ir = 1 A V1 V1 V1
Rated value Ir = 2 A V2 V2 V2
Rated value Ir = 5 A V3 V3 V3
Rated value Ir > 1 to 6 [A] V9 V9 V9
4. Primary rating (primary transformer)
Without specifi cation of primary rating W0 W0 W0
CT = A / Ir A VT = kV / Ur V W9 W9 W9
Line W9: Specify transformer ratio prim. 1000 A; 33 kV
Table 2 continued on next page