13/66
4.3.5 Parameterization of the display
The graphic display is intended for on-site visualization of measurement data, lists and alarms of the CAM
mobile. The operation of the display is performed menu-driven by means of the keys. In addition to predefined
displays the user can define free measurement assemblies via the register „display: internal“. If needed also a
preference display or automatic changing measurement displays can be configured.
The menu navigation can be done in 7 languages. The change of the language can be performed also locally
via the display. The operation of the display is described in
. Operating instructions in other
languages may be found on the supplied CD.
4.3.6 Save configuration
To activate the new configuration it must be downloaded to the device. This may be done by selecting the
button „Download to device“.
Note that the logger will not automatically be activated when the configuration
is downloaded. See „
4.3.7 Starting the logger
“.
It’s recommended to store the configuration for security reasons on the PC. So later on you will also be able to
make OFFLINE (without a device connected) modifications, which then may be downloaded to the device on-
site. Saving of configurations is performed via the file menu:
File | parameters | save file
4.3.7 Starting the logger
When downloading the configuration to the device the state of each logger part is not changed. If one of the
logger parts mean values t1 / t2, min/max values or meters was active it remains active after downloading,
otherwise it remains inactive.
The state of the logger will not be changed by a power failure or by
switching off the device. Therefore the CAM mobile may be transported
to the place of action, without the need to start the logger again on-site.
Starting or stopping of logger parts is done via the context menu in the device list. Doing so, the content of the
individual data loggers will not be changed. All data already stored will remain stored.
Using the right mouse key click on the device in the device list and select the logger menu:
Note: Alarm, event and operator list can not be started, stopped or reset. Lists are always active to
prevent manipulations.
