Section 3
Scanner
®
2000 microEFM
Grounding Procedures
To power the Scanner 2000 microEFM with an external DC supply, route the ground conductor through a
conduit opening in the top of the Scanner 2000 enclosure with the power conductors and connect it to the
JURXQGVFUHZLQVLGHWKHHQFORVXUHQRWHWKHURXQGVWLFNHUWKDWPDUNVWKLVORFDWLRQLQ)LJXUH
If national or local electrical codes require the enclosure to be grounded, a protective earth grounding
FRQGXFWRUPD\EHUHTXLUHG7RLQVWDOODSURWHFWLYHHDUWKJURXQGFRQQHFWDQHDUWKJURXQGFRQGXFWRUWRWKH
VWDLQOHVVJURXQGOXJQHDUWKHWRSRIWKH6FDQQHUHQFORVXUHDOVRVKRZQLQ)LJXUHRUWRWKHLQWHUQDO
JURXQGVFUHZDQGFRQQHFWWKHRWKHUHQGWRDJURXQGURGRURWKHUVXLWDEOHV\VWHPHDUWKJURXQG7KHJURXQG
OXJVZLOODFFHSWZLUHVL]HVIURP$:*VROLGFRQGXFWRUWR$:*VWUDQGHGFRQGXFWRU
Internal
ground screw
External
ground screw
Figure 3.1—Ground screw locations
