Scanner
®
2000 microEFM
Section 2
&$87,21
%HIRUHVWDUWLQJWKHV\VWHPUHPRYHWKHFDSVDQGDGGZDWHURUDQWLIUHH]HLIQHFHVVDU\WR
FRPSOHWHO\¿OOWKHSRWVDQGFROGOHJV$LUWUDSSHGLQWKHOLQHVZLOOSURGXFHHUURUVLQGLI
-
ferential pressure measurements.
!
:$51,1*(;3/26,215,6.+RXVLQJWHPSHUDWXUHPXVWQRWH[FHHG&)([FHVVLYH
WHPSHUDWXUHVZKLFKFRXOGUHVXOWIURPDPELHQWFRQGLWLRQVFRPELQHGZLWKUDGLDWHGDQGFRQGXF
-
WLYHKHDWIURPWKHSURFHVVFRXOGFDXVHWKHLQWHUQDOOLWKLXPEDWWHU\WRLJQLWHRUH[SORGH
,QVWDOODWLRQ3URFHGXUH²5HPRWH0RXQWWR2UL¿FH0HWHURU&RQH0HWHU
$6FDQQHUFDQEHPRXQWHGUHPRWHO\DQGFRQQHFWHGWRDQRUL¿FHPHWHURUFRQHPHWHUZLWKWXELQJIRU
VWHDPPHDVXUHPHQW7KHVHWXSRIWKHPHWHUUXQDQGSOXPELQJFRQ¿JXUDWLRQVFDQYDU\ZLGHO\GHSHQGLQJ
XSRQWKHFKDOOHQJHVH[LVWLQJRQORFDWLRQ
3/4 in. conduit connection for
input/output & communications
Cold legs connect to manifold
(slope to eliminate air trap)
Condensate pot (pipe tee
with blowdown valve attached)
Long cold legs protect the
sensor from extreme process
temperatures
Hot legs, insulated to within 1 ft of condensate pot
(1/2 in. diameter recommended)
MVT vent (use for
for filling cold legs)
Horizontal pole mount provides
clearance for block manifold
Figure 2.9—Remote-mount steam run installation (shown here with a cone meter). The remote-mount method
FDQEHXVHGZLWKDQRUL¿FHPHWHUDVZHOO
