User
Guide
Page 39
Basic Installation for Local and Remote Monitoring
14.
Configure the network setting for
RX
video recording server and your PC if necessary,
such as router/gateway port mapping (select
router/gateway IP as IP provided by your ISP
and the video recording server IP as IP provided
by the router/gateway), firewall, etc. (Please refer
to the manual of your router/gateway.)
15.
Run
WX-30
software at any network PC. (For
details of WX-30 software installation, please
refer to WX-30 Software Guide)
16.
Press
[Connect]
icon to pop up the
[Connect Window]
. For
example
, type and
select the following setting :
Broadband Connection :
Phone/IP
: 210.17.139.145
Connect Using
: TCP/IP Broadband
Password
: 000000
OR
Narrowband Connection :
Phone/IP
: 210.17.139.145
Connect Using
: TCP/IP Narrowband
Password
: 000000
If RX is set to advanced security mode, check
Advanced security mode
box and enter
User
Name
17.
Press
[Connect]
icon to connect your
PC and the video recording server. The video
appears on the WX-30 if success. Otherwise, the
[Warning]
board will pop up and the failure
message will be shown. For failure case, please
press
[Connect]
icon
to check that the
connection setting is valid or not.