User
Guide
Page 145
Connection with PTZ cameras
I. Connection with PTZ cameras
As
RX
video recording server built with a RS485 IN and OUT port, you can connect
port OUT to Pan/Tilt/Zoom cameras (in parallel) and connect port IN to keyboard controller.
The connection diagram is shown below.
RG59 cable
Power Adapter
RX
Cameras
CCTV
Monitor
RG59 cable
RS 485 Out : PTZ cameras
RS 485 In : PTZ Controller
2-wire RS 485
BUS
Setup Procedure
1.
Connect the P/T/Z cameras to the RS 485 OUT port in parallel at the
RX
rear
panel. Connect the P/T/Z cameras to video input port according to each P/T/Z camera ID.
Note: All P/T/Z cameras should be the same model.
2.
Connect the keyboard controller to the RS 485 IN port at the
RX
rear panel.
For keyboard controller setup, please refer to the keyboard controller manual.
3.
Configure P/T/Z cameras driver and setting through OSD menu by CCTV monitor.
Configure P/T/Z cameras driver and setting as follows:
1.
Press “
Menu
”
button, select
[SETUP]
option
and press “
Enter
”
button to enter
[SETUP]
sub menu. Select
[VIDEO]
option and press
“
Enter
”
button.
SETUP MENU
VIDEO
. . .
RECORDING
. . .
SWITCHES
. . .
DATE / TIME
. . .
CONNECTION
. . .
EVENT HANDLER
. . .
TRANSMITTER
. . .
PASSWORD
. . .
USER ACCOUNT . . .
RX-SE
. . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING
ENTER
