7
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
10
MENU / SELECT / ENTER
Rotary-push encoder for navigating in the editing menu, adjusting system settings and changing values and status in the corresponding
menu items.
Starting from the main display, press the encoder to enter the main menu. Select the individual menu items in the main menu (Control,
Settings, Info, etc.) and in the sub-menus by turning the encoder and confirm the selection by pressing the encoder. Change the value or
status in a menu item by turning the encoder and confirm the change by pressing the encoder.
11
BACK
Press BACK to go up one level in the menu structure. To go directly from the sub-menus to the main display, press and hold the BACK button
for about 2 seconds.
12
USB INTERFACE
USB interface for updating the device firmware. In the Service menu, set the status for USB Update to Yes. When available, download the
latest firmware from the product page at www.cameolight.com, unzip it and copy the files to a folder without special characters on a USB
stick. Disconnect the Moving Head from the mains and all input connections (DMX / Ethernet), connect the USB stick to the USB interface
and reconnect the Moving Head to the mains. The USB stick is automatically recognised and shown in the display. Now navigate to the
corresponding folder on the USB stick and confirm with ON. The update procedure begins. If updates are required for several components,
the procedure must be carried out individually for all updates. Do not remove the USB stick or disconnect the Moving Head from the mains
during the update procedure.
BATTERY-POWERED DISPLAY
The battery-powered display can be activated, even if the device is not connected to the mains. To do this, briefly press the rotary push encoder.
You can now access device information to change and save system settings without mains connection. External control of the spotlight is not
activated in this case. For this reason, the display shows that there is no DMX signal even if a DMX signal is present at the device.
13
PAN LOCK
Mechanical locking device used to prevent the rotation of the head in the horizontal direction during transport. Disconnect the unit from the
mains and slide the locking lever in the direction of the pan rotation axis, moving the head of the unit horizontally until one of the 8 locking
positions is found and the locking lever engages
LOCK
. Unlock the device before startup
UNLOCK
.
14
TILT LOCK
Mechanical locking device used to prevent the rotation of the head in the vertical direction during transport. Disconnect the unit from the
mains and slide the locking lever in the direction of the tilt rotation axis, moving the head of the unit vertically until one of the 7 possible
locking positions is found and the locking lever engages
LOCK
. Unlock the device before startup
UNLOCK
.
15
RECESSED GRIPS
In addition to the two transport handles on the base of the unit, there are practical
recessed grips at the top of the inner sides of the two device arms.
13
LOCK
LOCK
UNLOCK
UNLOCK
14
15
15