20
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
If the Quicklight mode is activated, the display does not automatically change to the main display; when leaving the Quicklight menu, Quicklight
mode is automatically terminated. The settings in the Quicklight menu are retained until the next restart of the spotlight; as a result,
Quicklight can be accessed repeatedly with the same settings as long as the spotlight remains switched on. After restart, the values in the
Quicklight settings are reset (PAN = 127, TILT = 127, DIMMER = 000, ZOOM = 127, FOCUS = 127).
HELP (Help menu)
In the Help menu you will find three pages with 1. Information on quick commands that take you directly to specific menu items, 2.
Information on the division of the display into control panels in the main menu and sub-menus, and 3. Information about the device itself.
Starting from the main display, press the rotary-push encoder to enter the main menu. Select
Help
by turning the encoder and press the
encoder to confirm. Select the desired information again by turning the encoder.
SET-UP AND INSTALLATION
Thanks to its integrated rubber feet, the spotlight can be positioned in a suitable location on a firm and level surface. Traverse installation
can be achieved with the help of two Omega brackets, which are attached to the base of the device
A
. 2 x Omega brackets are included.
Suitable beam clamps are available as an option. Ensure firm connections and secure the spotlight to the securing lug with a suitable safety
cable
B
.
Important:
Overhead mounting requires extensive experience, including the calculation of the limit values for load, the instal-
lation materials and regular safety inspection of all installation materials and spotlights. If you do not have these qualifications,
do not attempt to perform an installation yourself. Refer instead to a qualified professional.
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
----------------- Settings ----------------
Setup Display
Reverse
Backlight
Setup Display
Reverse
Backlight
----------------- Settings ----------------
Display
Dimmer
Motor
Opera.
Misc
Auto
Off
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
-------------------- Info -------------------
Firmware V1.x.x
Temperature 035°C
Fan Speed Auto
Runtime 0020 h
MAC
RDM-UID
Show DMX Values
Error Info
DMX Table
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
----------------- Service ----------------
Default Values
Reset
Test
LED Calibration
Reset Service Runtime
USB Update
Password
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
--------------- Quicklight --------------
Pan
Tilt
Dimmer
Zoom
Focus
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------ Help --------------------
Shortcuts
Turn encoder in the home screen
to change the DMX address
Push & turn right to jump to the
latest selected menu point
Push BACK for 3 seconds to jump to
the home screen without saving
Cameo
Opus XW
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
------------------ Help --------------------
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
Enter
Back
Touchscreen
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
----------------- Settings ----------------
Setup Display
Reverse
Backlight
Setup Display
Reverse
Backlight
----------------- Settings ----------------
Display
Dimmer
Motor
Opera.
Misc
Auto
Off
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
-------------------- Info -------------------
Firmware V1.x.x
Temperature 035°C
Fan Speed Auto
Runtime 0020 h
MAC
RDM-UID
Show DMX Values
Error Info
DMX Table
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
----------------- Service ----------------
Default Values
Reset
Test
LED Calibration
Reset Service Runtime
USB Update
Password
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
--------------- Quicklight --------------
Pan
Tilt
Dimmer
Zoom
Focus
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------ Help --------------------
Shortcuts
Turn encoder in the home screen
to change the DMX address
Push & turn right to jump to the
latest selected menu point
Push BACK for 3 seconds to jump to
the home screen without saving
Cameo
Opus XW
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
------------------ Help --------------------
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
Enter
Back
Touchscreen
B
A
A
