8
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
Display is rotated
by 180°
(overhead installation)
-> ENTER
<- MODE
-> ENTER ->
<- MODE
UP/DOWN
on = display permanently on
off = display goes off after ap-
prox. 60 seconds of inactivity
-> ENTER ->
<- MODE
UP/DOWN
This menu option allows you to define
which operating mode is to be enabled if
the DMX signal is interrupted in DMX mode.
-> ENTER
<- MODE
The last DMX command
is retained
Blackout
Auto programme
-> ENTER ->
<- MODE
UP/DOWN
Set
dimmer curve
dimmer curve
linear
Light intensity
increases linearly
with DMX value.
dimmer curve
exponential
Light intensity can
be finely adjusted
at lower DMX
values and broadly
adjusted at higher
DMX values.
dimmer curve
logarithmic
Light intensity can
be broadly adjusted
at lower DMX values
and finely adjusted
at higher DMX
values.
-> ENTER
<- MODE
S-curve
Light intensity can
be finely adjusted
at lower and higher
DMX values and
broadly adjusted
at medium DMX
values.
-> ENTER
<- MODE
Displays
firmware version
-> ENTER
<- MODE
Displays device
temperature in °C
-> ENTER
<- MODE
Displays total
operating time in
hours
-> ENTER
<- MODE
LED test
Functional test of all
LEDs from 1 to 25.
Display flashes
during test. Press
MODE or ENTER
to stop.
SYSTEM SETTINGS AND SYSTEM INFORMATION
To adjust system settings and access system information, press MODE repeatedly until "Sett" appears in the display. Confirm by pressing
ENTER. You can now use UP and DOWN to select and edit one of the following menu items:
