IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
9
DMX
SYSTEM
The menu item “system” allows the display switch-off to be configured and all settings to be reset. Press the MODE button repeatedly
until “SYSt” appears in the display. Now press ENTER, then use the UP and DOWN buttons to select the desired menu item and edit it as
required. Successful entry is confirmed when the display disappears for approximately one second.
-> ENTER ->
<- MODE
UP/DOWN
-> ENTER ->
<- MODE
/
-> ENTER
UP/DOWN
/
-> ENTER ->
<- MODE
/
-> ENTER
UP/DOWN
System
diSP
=
Display shutdown
on
= display shuts down after approx. 30 seconds of inactivity
oFF
= Display shutdown disabled
rESt
=
Reset to factory settings
no
= Do not perform reset by pressing ENTER
YES
= Perform reset by pressing ENTER
With display switch-off activated, an LED dot appears in the bottom right of the display. If there is no control signal, the LED dot will flash.
Flashing stops as soon as a control signal is present (DMX and slave operation).
