10
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
DMX
Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The
maximum range is approximately 8 metres. In DMX and slave modes, the spotlight’s IR
sensor is deactivated.
Blackout
The blackout button is used to switch off the effects
LEDs, strobe and centre LED regardless of which
operating mode is enabled via the remote control (device
display = oFF). Press the blackout button again to
reactivate the previously selected mode.
Auto programme
The auto programme categories rGbu (RGB+UV LEDs),
Str (strobe), rGb (centre LED) and MiX (RGB+UV LEDs +
centre LED) can be activated one after another
by pressing repeatedly. Setting speed using + and -.
Select the programmes in the respective category with
the help of the numeric keys (rGbu: AP01 – AP07 = digits
1 – 7, Str: AP01 – AP09 = digits 1 – 9, rGb: AP01 – AP05
= digits 1 – 5, MiX: AP01 – AP10 = digits 1 –- 0).
Music control
The sound programme categories rGbu (RGB+UV LEDs),
Str (strobe), rGb (centre LED) and MiX (RGB+UV LEDs +
centre LED) can be activated one after another
by pressing repeatedly. Select the programmes in the
respective category with the help of the numeric keys
(rGbu: AP01 – AP07 = digits 1 – 7, Str: AP01 – AP09 =
digits 1 – 9, rGb: AP01 – AP05 = digits 1 – 5, MiX: AP01
– AP10 = digits 1 – 0). Setting microphone sensitivity
using the MIC SENSITIVITY control.
Strobe
Activates the strobe effect. Select the strobe pro-
grammes AP01 – AP09 with numeric keys 1 – 9. Set the
strobe speed with + and -.
Colour mixing
RGB + UV LEDs
Press MANUAL, then select the colour by pressing R, G, B
or UV. Adjust the brightness using + and - (A, W without
function, centre LED without UV).
Auto programme[1]
Fade
Direct activation of the MiX auto programmes AP12
– AP14 (Fade). Select the 3 programmes by pressing
repeatedly. Setting speed using + and -.
IR REMOTE CONTROL
