11
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
This will take you to the submenu for setting the submenu items (see table, select with UP and DOWN, confirm with ENTER, change value or
status with UP and DOWN, confirm with ENTER).
Settings
Wireless
Settings
= W-DMX settings
W-DMX On/Off
On = W-DMX enabled
Off = W-DMX disabled
Reset
ENTER = Reset pairing with a transmitter and ready for
new pairing
Power Mode
=
Battery mode
Standard
Function disabled
Eco
Approx. twice the battery life at 50% brightness
Display
Reverse
= Rotate display
On
Display is rotated through 180°
(e.g. for overhead installation)
Off
No display rotation
Display
= Display lighting
On
Permanently on
Off
Deactivation after approximately 1 minute of inactivity
Menu Dim
= dim down using the controls
On
Spotlight is automatically dimmed on input to prevent
dazzling
Off
Spotlight is not dimmed on input
DMX Fail
= Operating status with DMX signal fault
Hold
Last command is retained
Blackout
Activates blackout
White
All the LEDs have 100% output
Power Fail
White
= Operating status in the event of a
power failure
Off
No change to current status
On
All the LEDs have 100% output
Dimmer
Curve
= Dimmer curve
Linear
Light intensity increases linearly with DMX value
Exponential
Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Logarithmic
Light intensity can be broadly adjusted at lower DMX
values and finely adjusted at higher DMX values
S-Curve
Light intensity can be finely adjusted at lower and
higher DMX values and broadly adjusted at medium
DMX values
Dimmer Resp. = Dimmer response
LED
Lamp responds abruptly to changes in DMX value
Halogen
Spotlight behaves like a halogen spotlight with soft
brightness changes
LED Calibra-
tion
= Color calibration
Red, Green, Blue,
White, Amber, UV
Individual color calibration. Cross-mode brightness
setting of the 6 LED groups RGBWA+UV with values
from 000 to 255
Auto Lock
= Automatic locking of the controls
On
Automatic locking of the controls after approximately 1
minute of inactivity. Display shows: “LOCKED"
To unlock: press and hold UP and DOWN simultaneously
for approx. 5 seconds
Off
Automatic locking of the controls is disabled
IR Remote
= Activate or deactivate control by IR
remote control
On
IR remote control activated
Off
IR remote control deactivated
Factory Reset = Reset to factory settings
Reset Now?
Resetting to factory settings:
Perform reset with ENTER, cancel with MENU
