8
ø6,3x45
CAME
ø3,9x13
V121
GEAR MOTOR INSTALLATION
- Remove the automation container cover by unscrewing the ø3.9x13 screw;
- Fasten the container to the sliding guide’s back terminal in the desired position with the ø6.3x45
screws provided;
GEAR MOTOR UNLOCKING
- Turn the handle as illustrated; the rehooking of the release will take place automatically at the first
manoeuvre, re-setting the handle in the original position.
- If there is a V121 cable release device (read the technical documentation accompanying the
accessory for assembly instructions), turn the handle as illustrated to lock and the ratiomotor.
Summary of Contents for VER KIT
Page 22: ...NOTES...
Page 23: ...NOTES...
