CAME TS4.3, User Manual

Page: 51 / 128

A
B
C
D
E
Page
19
-Manual
FA00546-EN
- ver
. 1 - 10/2016 - © C
ame S.p.A. - The cont
ents of this manual may be r
evised at any time, and without notice.
Thermal Zone Properties
Each zone device can be ‘calibrated’ to detect and adjust
the temperature as correctly as possible, taking into account
the environmental characteristics of the place in which it is
installed, the user’s needs and the technical characteristics
of the system.
Based on the characteristics of the device and only if
enabled, certain parameters are only available if enabled/
set while configuring the device.
Tap and then A .
ZONE MODULE CUSTOMISATION
Tap and hold down the device name
B
a
to customise the
name using the alphanumeric keypad C .
Once you have customised the name, tap to confirm and
move to the next menu.
To return to the previous menu without saving any settings,
tap .
ALARM THRESHOLD SETUP
Tap
B

and
B

to set the minimum (lower temperature
threshold) and maximum (upper temperature threshold)
temperature thresholds. If these are exceeded, the device will
send a notification which can be viewed in the events list, if
enabled during installation.
Use the + – keys to set the value to be associated with the
D and E thresholds.
Thermal Zone Setup
Properties
Properties
Living room (Id: 070014058401)
Living room
Living room
Living room
Lower temperature threshold
Upper temperature threshold
Comfort Log
Humidity Log Temperature Log
a


Lower temperature threshold
Upper temperature threshold Living room