CAME TS4.3, User Manual

Page: 50 / 128

A
B
C
D
Page
18
-Manual
FA00546-EN
- ver
. 1 - 10/2016 - © C
ame S.p.A. - The cont
ents of this manual may be r
evised at any time, and without notice.
Living room
Bedroom
Bathroom
Living room
Thermal Zone Control
Climate
Climate
External
From the Home Page, tap to display the thermal zones.
Use the arrows to view the various thermal zones. Each
zone has thermostats, temperature sensors or zone terminals
associated with it.
From this menu screen, for each zone, you can view the
operating mode, the temperature and the humidity detected
if the area is equipped with a humidity sensor
B
.
With a simple tap, you can turn off the zone immediately if it is
in active operation; on the contrary, if the zone is switched off,
the zone is set to operate as previously set. If there is an open
window contact, tapping the zone has no effect.
Tap and hold down the zone to access the control functions.
The icon indicates that heating is active, while the
icon indicates that cooling is active.
The icon indicates the power status of the boiler
The icon indicates the power status of the cooler.
The icon indicates that the window is open; this feature is
available if the function has been enabled during installation.
The open window sets zone operation to OFF. You can still
force operation of the zone as described below.
Tap the segment at the top of the home page to access the
menu for setting the individual zone
C
.
These buttons allow you to choose the following operating
modes:
Thermal zone setup;
Wildcard program setup
Manual program setup
Timed manual program setup
Automatic program setup
Disabling individual zone.