❶
❷
❸
❺
❹
❶ ❷
❸
❺
❹
Page
12
- Manual
FA01869-EN
- 08/2022 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Main control unit components
PXC2-32 / PXC2-64
PXC2-212
❶
230 Vac mains connection terminals.
Be careful, live parts
❷
Earth Faston / Terminal connection
❸
Earth connection cable for cover
❹
Battery-connection cables.
Respect the polarity (red = +, black = -)
❺
Control unit tamper
The battery must be secured to the control unit mechanics using double-sided tape.
- use a VRLA (valve regulated lead acid) battery
- the battery casing must be flammability standard UL94V-1 or higher
- the battery must comply with standard IEC 60896-21:2004 and/or IEC 60896-22:2004.
- the battery must be replaced by an experienced technician.
In the PXC2-212 control unit, the battery must be installed with the fuse holder supplied and a 6 Ah fuse.
LIST OF ELECTRICAL AND MECHANICAL CHARACTERISTICS
CONTROL UNIT MODEL
PXC2-64
PXC2-212
Input power supply voltage
230 V AC; 50-60Hz
Output rated voltage
13.8 V DC
Battery charger voltage (type A – EN50131-6)
13.8 V DC
0.75 A
13.8 V DC
1.1 A
13.8 V DC
1.5 A
Output voltage range
9-14.0 V DC
Overcurrent protection
17.5 V DC
Maximum current draw
0.42 A @ 230 V AC
0.56 A @ 230 V AC
0.85 A @ 230 V AC
Control board current draw
150 mA
150 mA
150 mA
Low SD level (battery)
11.4 V
11.4 V
11.4 V
Power supply outputs fault voltage
9.8 V
9.8 V
9.8 V
Intervention voltage for SD deep discharge protection
9.5 V
9.5 V
9.5 V
Maximum ripple on the output power supply voltage
200 mV
200 mV
200 mV
Alarm transmission operating mode
Pass-through
Operating temperature
- 10 to + 40 °C
Maximum humidity (not condensed)
75%
IP protection rating
30
ATS classification [EN50131]
SP3
Casing size (mm)
405x295x90
490x360x90
Safety rating EN50131-3
2
2
3
Safety rating EN50131-6
2
2
3
Environmental class
II
II
II
Maximum degree of pollution
2
2
2
Compliant with
EN60950-1, EN50130-4-1, EN50131-1, EN50136-2
IMQ certification