1
max. 5 cm
12-24 V
AC-DC
*
*
**
3
2
DIN 18650
BS 7036
EN 16005
3,50 m
3 m
2,50 m
2 m
d max = 2,5 m
d max = 3 m
3,50 m
3 m
2,50 m
2 m
d max = 2.5 m
max.
9 cm**
MOUNTING & WIRING
GREEN
BROWN
YELLOW
WHITE
PINK
GREY
RED
BLUE
POWER SUPPLY
OPENING INPUT
SAFETY INPUT
TEST
OUTPUT
* Output status when sensor is operational
** For compliance with EN 16005 and DIN 18650,
connection to door controller test output is required.
SE
NS
OR
WIDTH
Additional
adjustments
are possible by
LCD or remote
control
(see p. 5)
Part of the detection field can be masked to reduce it.
The arrow position determines the width of the detection field.
INFRARED SAFETY FIELD
CLOSER
AWAY
If necessary, adjust the IR-curtain
angle (from -7° to 4°, default 0°).
Activate the visible* spots to verify
the position of the IR-curtain.
ANGLE
* Visibility depends on external conditions. When spots are not visible, use the MRSP to locate the curtains.
** The distance between the inner curtain of the inside door sensor and the inner curtain of the outside door sensor should
always be smaller than 20 cm. The distance to the door leaf depends therefore on the thickness of the door leaf.
The size of the detection field varies according to the
mounting height and the settings of the sensor.
The full door width must be covered.
Mounting
height
Detection
width
Always verify the actual detection field width
with a piece of paper and not the MRSP,
which detects the whole emitted field.
2.00 m
2.20 m
2.50 m
3.00 m
3.50 m
2.00 m
2.20 m
2.50 m
d max
d max
3.50 m
3 m
2.50 m
2 m
3.50 m
3 m
2.50 m
2 m
DOOR
OR
M
R8
70
1 / F
A
0
0
36
2
M
0
6
☜☞
IX
IO
-S
T / 4
2.
8
6
4
4 / v
1 - 0
2.
16
