CAME BX-246V, Installation Manual

Page: 16 / 24

+
RUN S.
- +
SLOW S.
- +
RUN V.
- +
SLOW V.
- +
A.C.T.
- +
PAR.OP.
-
2
1 3 4 5 6 7 8 9 10
ZN5U
PWR
1
C1
C3
C7
C8
+
RUN S.
- +
A.C.T.
- +
PAR.OP.
-
ENGLISH
p.
1
6
16
-
M
an
u
al
c
od
e:
11
9
B
F
0
3
11
9
B
F
0
3
ve
r.
2
04/2
0
14
© 0
9
/2
0
10 © C
A
M
E c
an
ce
lli
A
uto
m
ati
ci
S
.p.
A
. - T
h
e d
ata a
n
d i
nf
or
m
ati
on i
n th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e a
n
d w
ith
ou
t o
b
lig
ati
on o
n th
e p
art of C
am
e C
an
ce
lli
A
uto
m
ati
ci
S
.p.a. to n
otify s
ai
d c
h
an
g
es.
ADJUSTMENT TRIMMER LIST :
- « A.C.T.» Adjusts opening waiting time. The gate closes automatically once this time-frame has elapsed. The waiting time
may be adjusted from 1 second to 150 seconds.
- « PAR.OP.» Adjusts partial opening of the gate. Pressing the partial opening button connected to 2-3P, the gate opens depending
on the length of the gate
- « SLOW S.» Adjusts the amperometric sensitivity which controls the force generated by the motor during slowdowns; if the
force exceeds the adjusted level, the system intervenes and inverts the direction of travel.
- « RUN S.» Adjusters the amperometric sensitivity which controls the force developed by the motor during movement; if the force
exceeds the adjusted level, the system intervenes and inverts the direction of travel.
- « SLOW V.» Adjusts the gate's endpoint slowdown speed when closing and opening.
- « RUN V.» Adjusts the gate's moving speed when opening and closing.
Function of the LED control warning-light and command and safety devices. :
- « 1» Red LED. Normally not lit up.
Warns that the TOTAL STOP button has been engaged.
- « C1» Yellow LED warning-light. Normally not lit up.
Warns of any obstacles between the photocells (these are connected to work
in the REOPEN WHILE CLOSING mode).
- « C3» Yellow LED warning-light. Normally not lit up.
Warns of any obstacles between the photocells (these are connected to work
in the PARTIAL STOP mode).
- « C6» Yellow LED warning-light. Normally not lit up.
Warns of any obstacles detected by the sensitive edges (these are connected
to work in the REOPEN WHILE CLOSING mode).
- « C7» Yellow LED warning-light. Normally not lit up.
Warns of any obstacles detected by the sensitive edges (these are connected
to work in the RECLOSE WHILE OPENING mode).
- « PWR» Green LED. Normally lit up.
Notifi es that the card is working properly.
- « PROG ON» Red LED. Normally not lit up.
During the transmitter activation procedure, it lights up or fl ashes.
LED signal lights
Adjustments