CAME A 5024, Installation Manual

Page: 20 / 48

100 mm
p.
8
- M
anu
al
FA
0
1
1
6
4
-E
N
- 0
5
/2
0
18 - © C
A
M
E S
.p
.A
. - T
ransla
te
d o
riginal inst
ru
ct
io
ns
DURING OPENING:
Release the gearmotor and move the wing to the maximum
desired open position, unscrew the fi xing screws of the
deceleration microswitches unit and the unit that controls the
stop during opening.
Slide the microswitches unit along the microswitch-support rod
until it is inserted by contact on the microswitch unit actuation
runner.
Fix the microswitches unit by tightening the respective screws.
DURING CLOSURE:
Move the wing to no closer than 100 mm from the end stop
during closure (detail B).
Unscrew the fi xing screws of the group deceleration
microswitch during closure.
Slide the microswitch unit along the microswitch-support rod
until it is inserted by contact on the microswitch unit actuation
runner.
Fix the microswitch unit by tightening the respective screws.
5.7 Adjusting the deceleration microswitches for opening and closure
Gate jamb
Microswitch unit for
slowing and stopping
during opening
Cable holder
Support plate
microswitch
Deceleration microswitch
for closure
Worm-gear
Microswitch actuation
runner
screw-nut
Fixing screws
Screw-nut