CAME 803BB-0120, Installation Manual

Page: 53 / 160

P
age
13
- Manual
FA01610-EN
- 08/2021 - © C
AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T
ranslation of the o
riginal instructions
1 Cut the slot-cover profiles to the same size as the boom slot minus 10 millimetres.
2
Insert the slot-cover profiles into the grooves on both sides of the boom.
5 Cut the excess part of the profile, leaving a 7 mm overhang.
4
Insert the anti-impact rubber profile into the groove, aligning it with the end cap.
3 Fit the rubber end cap in position.
6
Insert the rubber profile end cap into the groove in the boom closing cap. Use the screws to fasten the boom end cap.
7 Fit the anti-shearing protective cover onto the boom-attachment cover and fasten it using the screws supplied.
⚠
1 2
3
4
5
6
7
Choosing balance spring and fastening hole
Spring code (colour) 001G02040 Ø 40 mm (yellow) 001G04060 Ø 50 mm (green)
Hole to which fasten the spring
A B A B
Passage width clearance (m) from 1.5 to 1.75 from 1.75 to 2.25 from 2.25 to 2.75. from 2.75 to 3.75.
Simple boom means the boom complete with slot cover, cap and rubber profile.
A
B