CAME 001CK0010, Manual

Page: 26 / 64

10
Connection example M
M1
BOUT
M2
SW3
PR
OG
RESE
T
PROG
M2 M1
+ –
VLS/300
B
B
–
NO
C
– +
001DC002AC
001DC005AC
M
Programming
The kit is pre-configured to manage a single call originating from a single entry panel. One or more receivers answering the same call can be added, by
following the below “Call button programming” procedure.
Initial programming
M1
BOUT
SW3
PR
OG
RESE
T
PROG
M2
SW3
PR
OG
RESE
T
PROG
SW3
PR
OG
RESE
T
PROG
>3’’
<6’’
M1
BOUT
SW3
PR
OG
RESE
T
PROG
M2
a




 
beep

A
SW3
PR
OG
RESE
T
PROG
Entering Programming Mode
. Press the PROG
a
key for at least 3 seconds and then release it
(within 6 seconds), as soon as the LED PROG lights up and the key back lighting flashes as illustrated
in figure

. Failure of the PROG LED to light up, indicates a malfunction. Check the connections and
re-access the programming mode.
Programming of the Key Type. Press the first key of the entry panel in the position indicated

/

A until the backlighting LED stops flashing

and remains lit.
Programming the call keys. Lift the receiver (if present) of the extension that you want to programme

then press the door lock release and AUX2

buttons. On the entry panel, press the call
key to associate with the internal extension

: an acoustic signal will confirm that the setting was
stored. Hang up the receiver again, if necessary

and continue, repeating the same operations for
the other extensions.
001CK0010-14FR-15FR 24810650 05-08-14_EN