CAME 001CK0010, Manual

Page: 27 / 64

11
SW3
PR
OG
RESE
T
PROG






 

beep
SW3
PR
OG
RESE
T
PROG
SW3
PR
OG
RESE
T
PROG
SW3
PR
OG
RESE
T
PROG
<1’’
<1’’
Exiting programming. Briefly press the PROG
key

: the PROG LED off. NOTE. If no action is
performed, the procedure will automatically end
after 30 minutes.
Reprogramming procedure
Entering Programming Mode.
Press the PROG
a
key for at least 3 seconds and then release it (within
6 seconds) as soon as the LED PROG light flashes and the key back lighting lights up as illustrated in
figure

. Failure of the PROG LED to light up, indicates a malfunction. Check the connections and
re-access the programming mode.
M1
BOUT
SW3
PR
OG
RESE
T
PROG
M2
M1
BOUT
SW3
PR
OG
RESE
T
PROG
M2
SW3
PR
OG
RESE
T
PROG
>3’’
<6’’
 
SW3
PR
OG
RESE
T
PROG
>3’’
<6’’
a
Programming the call keys. Lift the receiver (if present) of the extension that you want to programme

then press the door lock release and AUX2

buttons. On the entry panel, press the call
key to be associated with the internal extension

: an acoustic signal will confirm that the setting
was stored. Hang up the receiver again, if necessary

and continue, repeating the same operations
for the other extensions.
Exiting programming.
Briefly press the PROG key

: the PROG LED off. NOTE. If no action is performed, the procedure will automatically end after 30 minutes.
Programming key type.
At the “Programming Call Buttons” stage, press the PROG

key for at least 3 seconds and then release it (within 6 seconds), as
soon as the LED PROG lights up and the key back lighting flashes as illustrated in figure

, entering “Programming Button Types/Combinations” as part
of the procedure.
Press the first key of the entry panel in the position indicated

until the backlighting LED stops flashing

and remains lit.
At the end, exit programming, briefly press the PROG key

: the PROG LED will turn off. If no action is performed, the procedure will end automatically
after 30 minutes.

001CK0010-14FR-15FR 24810650 05-08-14_EN