16
Plug Buttons
Tapping Screw
Plastic Washer
Hinge Pin
Freezer
Door
a.
Lower bottom socket of freezer door
onto pin on bottom hinge bracket. Be
sure washer is in place.
b. Tilt door toward cabinet and gently
push door under centre hinge bracket
and align with the hole in the centre
hinge bracket.
c.
Reinstall hinge pin with a 7/32" socket
and ratchet so it extends through a
hole in centre hinge bracket and into
socket on top of freezer door.
Rehang Fresh Food Door
a. Lower bottom socket of fresh food door onto centre hinge pin. Be sure washer
is in place.
b. Tilt door toward cabinet, lifting the top hinge so the pin fits into the socket on
top of the door.
c. Tighten the top hinge screws after supporting the door on the handle side and
ensuring the gap between the doors is even all across the front.
d. Replace the hinge cover.
Rehang Freezer Door
Safety Infor
mation
Installation Instr
uctions
Customer Ser
vice
Operating Instr
uctions
Tr
oubleshooting T
ips
Reversing the Door Swing
B. On models with partial width freezer door handle.
Remove the Plug Button and Screw from the top right hand side of the
door. Remove the two screws from the handle
Note: The two handle screws have different
threads.
Install the handle screws such that the fine threaded machine screw is
located in the hole that is more towards the centre of the door and the
courser threaded tapping screw is located close to the right socket.
Reinstall the screw and plug button to the top left hand side of the door.
Tapping Screw
Machine Screw
Center
Hinge
Bracket