10
PCU or PCUL
Note:
Note:
PCU/PCUL Hitch Installation
Controlled: MPREV4-75-001, Partial Release_09/10/2018
Chassis Plate and Receiver Bar
Locking or non-locking Pin (2)
Tow Bar
MUST have Swivel Casters
on Tow Bar end
IX. PCU/PCUL Hitch Installation Instructions
WARNING!
Components and Cart, with installed Hitch are
NOT
intended for use on the STREET or HIGHWAY. Pulling speed should
NOT
exceed ten (10) miles per hour.
When the Tow Bar is not in service, it should be pinned in the vertical position or completely removed from the cart to reduce a trip hazard.
CAUTION!
Careful attention is required while towing these carts. It is
NOT
recommended to connect more than six (6) carts together.
Unplug power before moving and confirm all doors are closed and latched.
1. Place cart on it's side.
2. Line up Chassis Plates with molded-in steel threaded inserts.
3. Use Hex Head Bolt and a washer with each bolt. Tighten snug (Do Not overtighten). Use removeable thread-locker.
4. Attach Hitch Ball (if using) and Tow Bar.
5. Insert Locking or Non-Locking Pin to secure.
