Cambridge SoundWorks MegaWorks 210D, User Manual

Page: 6 / 20

SETUP OPTIONS
Cambridge SoundWorks, Inc. supplies screws and plastic
anchors for convenience, but it is the speaker purchaser’s
responsibility to insure that any speaker placement is
secure, stable and reliable. Cambridge SoundWorks
assumes no responsibility for damage to its products or
any damage to property resulting from speaker positioning
or placement.
SUBWOOFER/AMPLIFIER
The Subwoofer/Amplifier requires no assembly.
SATELLITES
Desktop Placement
Each satellite is shipped with a Desktop Stand installed.
You can also install the Volume Control to a Desktop Stand
(see page 12). Some program sources (stereo televisions,
portable CD players) provide their own output level adjust-
ment. The volume control is optional in these cases.
Shelf Placement (or other flat surface) without the
Desktop Stand
A) Desktop Stand Removal: unscrew the thumbscrew to
release the satellite.
B) Apply the soft, self-adhesive feet to the bottom surface
of each satellite, as shown.
Wall Mounting With Supplied Hardware
Note: Use the “hook and loop” fastener to secure the
volume control to a convenient flat surface if not using the
Desktop Stand
C) Apply the soft, self-adhesive feet to the back of the
satellite as shown. The feet improve stability mounting
and protect the finish of both the wall and the satellite.
D) Install the No.10 screw and anchor in the wall so that its
screwhead protrudes about 3/8 inch.
E) Adjust the screw so each satellite can be hung with just
a small amount of pressure.
6
Apply Feet to
Bottom for Shelves
Apply Feet to Back
for Wall Mounting on
Screwhead
Install Mount Speaker
A
B
D
C
E