15
15
15
15
Speaker Connections
To connect the 2-meter speaker cables (two wires at
each end):
Push back the red speaker input tab on a satellite,
exposing the wire hole.
Fully insert one of the wires with a red band into the
wire hole and release the tab.
Repeat the procedure with the adjacent speaker wire
and the black speaker input tab on that speaker.
Connect the two wires at the other end of that same
speaker cable to the red and black “R” speaker input
tabs on the subwoofer. This satellite becomes the
Right channel satellite.
Repeat the preceding process to connect the other
satellite (making it the Left channel satellite).
POWER
120VAC 60Hz
RISK OF FIRE
REPLACE FUSE
AS MARKED
AC Connection and Placement
Make sure the subwoofer Power switch is in the OFF
position (O).
Plug the supplied power cable first into the subwoofer
back panel AC socket. Then connect it to an AC
power socket.
Place the satellites and subwoofer in their preferred
positions, then switch the Power swith to the ON (I)
position.
Summary of Contents for MegaWorks 210D
Page 1: ...P O W E R E D S A T E L L I T E S U B W O O F E R S Y S T E M U S E R M A N U A L ...
Page 18: ......
Page 19: ......