Addendum: adjusting individual speaker channel output levels (software version 912).
Rev.2
Do not use the procedure described on pg. 31 of the Owner’s manual to adjust individual speaker output levels.
Use the following procedure:
To estimate speaker output levels
To adjust speaker output levels
1. Press VOL SETUP on the remote to view the AMP
SETUP MENU (A).
2. Select BALANCE and press Enter to view the
speaker list on the BALANCE PAGE. (See B).
1. From Stop, press SETUP. Use the navigation
buttons to select SPEAKER, then Press ENTER.
2. Select TEST TONE. Use the navigation buttons to
highlight ON, then press ENTER (see image below).
A test tone will play on each channel in turn.
3. Using the front left and right speakers as a refer-
ence output level, note if the center, right rear or left
rear speakers sounds louder or softer. Exit SETUP by
pressing the SETUP button again.
3. Select a channel to adjust and press Enter. You will see
an up or down adjustment screen (C). Adjust output with
the navigation keys.
4. Repeat for any other channels requiring adjustment.
5. Press VOL SETUP to exit. Return to the Test Tone
function to confirm your adjustments, if desired.
A
B
C
Summary of Contents for MegaTheater AVS500
Page 1: ...D V D P L A Y E R T U N E R P R E A M P L I F I E R U S E R M A N U A L...
Page 5: ...5...
Page 39: ...38...
Page 40: ......
