Cambridge SoundWorks MegaTheater AVS500, User Manual

Page: 25 / 41

25 25 25
SHUFFLE ON – Plays all the files in the selected folder
once in random order.
Changing Transitions Between JPEG Files:
Press the JPEG button on the remote. Each press
selects the next higher mode. Twelve slide show tran-
sition modes are provided:
Mode 0 – no transition (default)
Mode 1 – wipe from top
Mode 2 – wipe from bottom
Mode 3 – wipe from top and bottom to center
Mode 4 – wipe from center to top and bottom
Mode 5 – vertical blinds
Mode 6 – wipe from left to right
Mode 7 – wipe from right to left
Mode 8 – wipe from left and right to center
Mode 9 – wipe from center to left and right
Mode 10 – wipe from edge to center
Mode 11 – horizontal blinds
Mode 12 – random
JPEG Image Rotation:
There are four modes to rotate a picture that does not
display correctly: Invert, Mirror, Left, and Right. These
operations are allowed only when a picture is being
displayed manually, and will be cancelled automatical-
ly when a new picture is displayed. The direction key
is used to select the different rotation modes:
UP button : Invert/Normal
Down button
v
: Mirror/Normal
Left button < : Turn left
Right button > : Turn right
v
Zoom:
The AVS500 provides both zoom in/out for DVD, VCD,
and SVCD and zoom with pan functions for JPEG pic-
tures. Press the ZOOM key to select the zoom ratio
options. When ZOOM mode is on, any picture will be
displayed at the last ratio selected by the user. An
OSD message will indicate the current ratio. If ZOOM
mode is on, << and >> buttons are used to control the
ratio of zoom in/out. In zoom ratios above 100%, use
the < , > , , and
v
buttons to pan to different areas of
the picture. When ZOOM mode is off, each picture is
scaled to fit the whole screen.
Note: during ZOOM mode, slide show transition and
image transformation are disabled.
Programmed Playback:
When in PBC OFF mode with the disc stopped, you
may program a playing sequence.
1. Press the PROGRAM key to enter
programming mode.
2. Press the number key corresponding to the first
track you wish to play. The OSD will display P01:
(Track #).
3. Press the number key for the next track, the OSD
will read P02: (Track #).
4. Continue until all tracks are programmed, then
press PLAY or ENTER to begin programmed play.
If you make a mistake during programming, press
CLEAR, which will erase the last entry.
v