background image

13

Connection to Sound Blaster
Live! via Digital DIN

DOLBY DIGITAL
(AC-3) SPDIF IN

SPEAKER OUTPUTS

LINE IN REAR IN

C SUBWOOFER RS

LS

R

L

15V

DC IN

DIGITAL

DIN

ANALOG          AUTO

  INPUT

DVD OUTPUT

(EXAMPLE: CREATIVE LABS

PC-DVD ENCORE Dxr2)

SOUNDCARD OUTPUT

(EXAMPLE: SOUND BLASTER LIVE!)

DIGITAL

OUTPUT

REAR

OUT

LINE
OUT

POWER
SUPPLY

ADAPTER

RIGHT SURROUND

SATELLITE

RIGHT SATELLITE

LEFT SURROUND

SATELLITE

LEFT SATELLITE

CENTER CHANNEL

SPEAKER

SUBWOOFER

BLACK

GREEN

Wiring Diagram

If your Sound Blaster Live! sound
card includes a Digital I/O card,
you can take advantage of the
clear, distortion-free audio
available from its Digital DIN
output.
1. Insert on end of the SPDIF cable

into the Digital DIN output jack
on the Sound Blaster Live! Digital
I/O card.  The position of the
Digital DIN connector on the
Digital I/O card may be different
from this diagram.  The Digital
DIN connector is the only
connector with a 9-pin configura-
tion.

2. Insert the other end of the SPDIF

cable into the Digital DIN input
on the decoder amplifier.

3. Use the following procedure to

configure the Sound Blaster Live!
sound card for four speakers:

•  Bring your mouse pointer to the top

of the monitor screen to display the
Creative Launcher.

•  Click on AudioHQ.
•  Click on the Speaker tab.
    The speaker dialog box will appear.
•  On the configuration tabbed page,

select the “4 Speakers” option.

•  A sofa icon (representing you)

appears in the center of the preview
box, with four speakers at the corners
of the box.

•  In some versions of Sound Blaster

Live! software, you can select the
“four-speaker” output option in the
Environment deck of the Surround
Mixer application (located in the
Sound Blaster Live! program tab of
the Creative Launcher).

Note: When the Analog/Auto switch is

pushed towards the Auto side, the
signal at the Digital DIN input is given
priority and the signal at the Analog
Audio inputs will be ignored.  To listen
to a sound source through the analog
audio inputs, push the switch to the
Analog side.

DOLBY DIGITAL
(AC-3) SPDIF IN

SPEAKER OUTPUTS

LINE IN REAR IN

C SUBWOOFER RS

LS

R

L

15V

DC IN

DIGITAL

DIN

ANALOG          AUTO

  INPUT

Digital DIN Connector

DIGITAL I/O CARD

SPDIF CABLE

DTT2500 Digital Decoder Amplifier

DIGITAL DIN

Summary of Contents for DTT250
























Reviews: