• These optional filters can be
connected at either end of the
speaker wires of your Left and
Right Main speakers.
1) You can connect a filter’s
INPUT FROM AMP wires to
speaker outputs on your
receiver or amplifier, then
reconnect the main speaker wire
to the filter’s OUTPUT TO
SPEAKER leads with the wire
nuts supplied.
2) You can also connect a filter
at the speaker. Connect the
filter’s OUTPUT TO SPEAKER
leads to your speaker’s input
terminals, then reconnect the
main speaker wire to the filter’s
INPUT FROM AMP wires with
the wire nuts supplied.
• As with all speaker connections,
be sure to maintain consistency
with respect to the + and —
terminals on the receiver and
those on the speakers, including
the
BassCube
subwoofer. The
connecting wires on the filters
are coded by the use of one
copper-colored conductor and
one silver.
Installing Low Cut Filters
Specifications
BassCube 10
BassCube 12
Amplifier Power:
75 watts
100 watts
(at 100 Hz, <.5% THD)
Driver Size:
10 inches
12 inches
Sensitivity for full output at 100hz.
Subwoofer level at max.
Low pass frequency set at 160 (LFE):
Line Level Input (mono), millivolts
95
110
Speaker Level Inputs (stereo), millivolts
250
300
Low Pass Filter Response:
24 dB/Octave
24 dB/Octave
Frequency Response, Hz (
±
3 dB):
LP setting
60 Hz
32-75 Hz
27-58 Hz
75 Hz
34-85 Hz
27-68 Hz
95 Hz
36-100 Hz
28-90 Hz
130 Hz
37-120 Hz
28-145 Hz
160 Hz
39-150 Hz
29-170 Hz
7
