background image

A Note About Dolby Digital
(AC-3), Large Front Speakers And
Powered Subwoofers

Most Dolby Digital (AC-3) decoders

remove the Low Frequency Effects
from the Main speakers if the
“Subwoofer Output” switch is set to
“On”. The Main speaker “Large/Small”
switches may still appear to function,
but no deep bass will reach the Main
speakers.

This automatic deep bass filtering is

unnecessary with large Main speakers.
If you wish, you can send all Low
Frequency Effects signals to both your
Main left and right speakers 

and

 to

your subwoofer by turning the sub-
woofer output to “Off” and setting the
Main left and right speakers to
“Large”. This blends all the output of
the Low Frequency Effects channel
with the Main left and right speakers.
The 

BassCube 

subwoofer needs to be

connected with speaker wire to the
Main speaker outputs in this case.

Power Connections

After making the audio connections,

plug the power cord into any conve-
nient 120-Volt AC, 60 Hz outlet and
switch the subwoofer “On”. Do 

not

plug it into a switched outlet on your
amplifier or receiver, as either

BassCube

 subwoofer could draw

sufficient current at high volume
levels to possibly damage the
switched outlet’s relay mechanism.

The 

BassCube 

subwoofer has an

automatic “Power Off” circuit that
turns off power to the amplifier
circuit after it has been silent for

over 15 minutes. The 

BassCube

subwoofer rapidly activates as soon
as a new signal is present. This
feature operates when the switch

Figure 2. 

Using speaker wire

OUTPUTS

TO POWER AMP

L

R

To power amp

(Front amp in 
surround system)

PREAMP

POWERED SUBWOOFER

Y-adapters

Figure 3. 

Using “Y” adapters and phono cable

SURROUND DECODER OR RECEIVER

OUTPUTS

L

R

FRONT

SURROUND

CENTER

SUBWOOFER

*

* Labelled “Mono”

on some units.
Be sure the output 
signal is full-range.

Figure 1. 

Surround decoder or receiver with 

subwoofer (mono) output

INTEGRATED AMP OR RECEIVER

(FRONT)

BASSCUBE

R

L

SPEAKER LEVEL INPUTS

+

+

OUT TO SPEAKERS

R

L

+

+

TO RIGHT 

FRONT 

SPEAKER

TO LEFT 
FRONT 
SPEAKER

R

MONO

L

LINE 

LEVEL 

INPUTS

BASSCUBE

R

MONO

L

LINE 

LEVEL 

INPUTS

BASSCUBE

+

+

SPEAKER OUTPUTS

3

Summary of Contents for BassCube 12














Reviews: