3
23. Safety knob Lever Lens plate
24. Bellows
25. Scale Swing (Tilt)
26. Scale Rise & Fall (Lateral Shift)
27. Scale Focus
28. Front Ring Bellows (3C)
29. ¼” Thumb Screw (3F)
INSTRUCTIONS
These instructions describe the main functions of the X2-PRO camera system.
Firstly the set-up of the camera in general is described. Then the possible lenses and interfaces are
presented. Finally the way to work with this new camera system is pointed out.
3
Camera Assembly
3A.
Checking your parts list
Remove all camera parts from the carton box. To make a complete system make sure that you have one of
each of the following:
- X2-PRO Camera Body (is completely assembled)
- Mountblock DSLR camera (see 3B)
- Bellows with bayonet fitting appropriate DSLR camera (see 3B)
- Lens Plate (see 3C)
- Lens (see 3C)
- Your DSLR camera
5
23
24
7
6
25
26
27
