UPDATED: 02-07-2010
Instruction Manual CS-Chronos
8
CS-Chronos rig adjustments
The position of the front assembly (camera) in relation to the back assembly (shoulder pad) can be
adjusted in the x, y and z direction and axis.
The CS Chronos also features a memory setting to ensure a reproduction of the ideal user settings.
Before adjusting the middle assembly (indicated dark grey in the picture above), please ensure that the
rods are set into the snapped position of the CS-151 clamps (explained at page 4).
Loosen knob A (counter clockwise) and adjust the desired angle of the front assembly in relation to the
middle and back assembly, when the desired angle is set fasten knob A (clockwise).
Loosen knob B (counter clockwise) and adjust the desired angle of the back assembly in relation to the
middle and front assembly, when the desired angle is set fasten knob B (clockwise).
Note: for clarity the CS-154 brackets are not
shown in the following images.
