UPDATED: 02-07-2010
Instruction Manual CS-Chronos
2
Thank you for purchasing a Cambo product
The Cambo CS system complies with the “Arriflex
®
15mm Light Weight” standard.
This means the CS system is compatible with parts of other brands using the 15mm
light weight standard. The 15mm light weight standard characteristics are: 15mm iris
rods that are positioned 60mm apart and 85mm below the optical axis.
The Cambo CS Chronos camera support is a fully adjustable. The offset of the
HDSLR is adjustable in the x, y and z axis. This provides an optimal viewing position,
whether you use a loupe or a direct view on the HDSLR monitor.
The Chronos features the telescopic CS-H2 handle grips, giving the user full control
over the positioning of the grips.
Due to the modular character of the Cambo rig system, the user is fully in charge of
customizing the rig to his or her personal preferences.
The Chronos-Rig can be used with any follow-focus and/or matte box, this rig
configuration centers the weight of the rig on the handle axis.
Warnings
Before loosening a clamp knob, ensure that the loosened part of the rig is
supported.
Do not tighten the clamp without a rod inserted. This can deform and damage
the clamp.
Always check, after (re)assembly of the rig, if the clamps connecting the rods
are well tightened.
Do not lift the rig while holding only one handle. This could lead to excessive
force momentum on the handle joint, causing it to shift.
