UPDATED: 02-07-2010
Instruction Manual CS-Chronos
5
Assembly of the CS-Chronos rig
Insert the CS-1512 rod into
the CS-151 clamp.
Twist the rod until you feel it
snap into the preset position.
Tighten the related clamp
knob to fix the position of the
iris rod.
Position the rod/clamp
assembly as shown in the
picture.
Insert the other CS-1512 in to
the CS-151 clamp, rotate the
rod until the snap, then
tighten the related clamp
knob. The other CS-151
clamp and CS-1590 are
assembled in the same order.
This picture show’s the
assembly of the middle part
of the rig.
Its advisable to use a tripod
for the assembly of the CS-
Chronos rig.
Its also advisable to use
quick-release plates for the
connection between the rig
and camera and between rig
and tripod. This ensures a
fast decoupling of both rig
and camera.
