![Cambium PTP 450 series User Manual Download Page 169](http://html1.mh-extra.com/html/cambium/ptp-450-series/ptp-450-series_user-manual_3587321169.webp)
PMP 450 Configuration and User Guide
Glossary
ptp-450 (July 2014)
4-149
Regulatory Requirements for CEPT Member States (www.cept.org)
When operated in accordance with the instructions for use, Cambium Wireless equipment operating in the
5.4 GHz bands is compliant with CEPT Recommendation 70-03 Annex 3 for Wideband Data Transmission
and HIPERLANs. For compliant operation in the 5.4 GHz band, the transmit power (EIRP) from the
integrated antenna or a connectorized antenna shall be no more than 0.5 W (27 dBm).
For EU member states, RLAN equipment in the 5.4GHz bands is exempt from individual licensing under
Commission Recommendation 2003/203/EC. Contact the appropriate national administrations for details
on the conditions of use for the bands in question and any exceptions that might apply. Also see
www.ero.dk for further information.
10 MHz channels are used, centered on 5475 to 5595 and 5655 to 5715 in 5 MHz increments. This is
within the 5470 to 5725 MHz U-NII band with 5600 to 5650 MHz excluded.
Cambium Radio equipment operating in the 5470 to 5725 MHz band are categorized as “Class 1” devices
within the EU in accordance with ECC DEC(04)08 and are “CE” marked
to show
compliance with the European Radio & Telecommunications Terminal Equipment (R&TTE) directive
1999/5/EC. The relevant Declaration of Conformity can be found at
http://www.cambiumnetworks.com/support/ec_doc/
A European Commission decision, implemented by Member States on 31 October 2005, makes the
frequency band 5470-5725 MHz available in all EU Member States for wireless access systems. Under this
decision, the designation of Canopy 5.4GHz products become “Class 1 devices” and these do not require
notification under article 6, section 4 of the R&TTE Directive. Consequently, these 5.4GHz products are
only marked with the
symbol and may be used in any member state.
UK Notification
The 5.8 GHz connectorized product has been notified for operation in the UK, and when operated in
accordance with instructions for use it is compliant with UK Interface Requirement IR2007. For UK use,
installations must conform to the requirements of IR2007 in terms of EIRP spectral density against
elevation profile above the local horizon in order to protect Fixed Satellite Services. The frequency range
5795-5815 MHz is assigned to Road Transport & Traffic Telematics (RTTT) in the U.K. and shall not be
used by FWA systems in order to protect RTTT devices. UK licensing specifies that radiolocation services
shall be protected by a Dynamic Frequency Selection (DFS) mechanism to prevent co-channel operation in
the presence of radar signals.
Brazil Notification
For compliant operation in the 5.4 GHz band, the Equivalent Isotropic Radiated Power from the integrated
antenna or connectorized antenna shall not exceed 27 dBm (0.5 W).
The operator is responsible for enabling the DFS feature on any Canopy 5.4 GHz radio by setting the
Country Code to “Brazil”, including after the module is reset to factory defaults.
Important Note:
This equipment operates as a secondary application, so it has no rights against harmful
interference, even if generated by similar equipment, and cannot cause harmful interference on systems
operating as primary applications.
Summary of Contents for PTP 450 series
Page 1: ...Cambium PTP 450 User Guide System Release 13 2...
Page 20: ......